Cisco CCNP / BSCI Certification: Introduction To ISIS Terminology: Unterschied zwischen den Versionen
| Zeile 1: | Zeile 1: | ||
| − | When you | + | When you're studying to pass the BSCI exam and earn your CCNP certification, you are going to be introduced to ISIS. ISIS and OSPF are each link-state protocols, but ISIS works quite differently from OSPF. You should master these facts in order to earn your CCNP.<br><br>1 of the major differences in between OSPF and ISIS will be evident to you when you initial start your BSCI exam research, and that is the terminology. ISIS uses terms that no other protocol you have studied to date utilizes, and studying these new terms [http://www.ionizeroasis.com/pages/Alkaline-Diet.html alkaline diet] is the initial step to BSCI and CCNP exam good results.<br><br>First off, what does "IS" stand for in "ISIS"? It stands for "Intermediate System", which sounds like a group of routers. As opposed to Autonomous Systems, which are logical groups of routers, an Intermediate Technique is just a single router. That's it.<br><br>You are going to also turn into familiar with End Systems, referred to in ISIS as an "ES". The End Program is basically an end host.<br><br>ISIS and OSPF each use the idea of locations, but ISIS requires [http://www.youtube.com/watch?v=eaWy8Z-nnAs life ionizer 9100] [http://www.amazon.com/Water-Ionizers-Made-Easy-ebook/dp/B008MPHQOS/ water ionizers] a different approach to this concept. ISIS routers use 3 diverse sorts of routing levels, according to the location a router has been placed in. Level 2 routers are connected only to the backbone and serve as a transit device amongst non-backbone locations. Level 1 routers are completely internal to a non-backbone area.<br><br>ISIS utilizes both Level-1 and Level-two Hellos, which means that the two varieties of routers just mentioned can't form an adjacency. Fortunately for us, there is a middle ground, and that is the Level 1-2 router. These routers connect non-backbone locations to backbone areas. L1-L2 routers keep two separate routing tables, one for L1 routing and one more for L2 routing. This is the default setting for a Cisco router, and L1-L2 routers can type adjacencies with each L1 and L2 routers.<br><br>Part of the challenge of understanding ISIS is finding used to the differences among ISIS and OSPF. Preserve studying the terminology, master 1 concept at a time, and soon you will be a master of ISIS and a CCNP to boot! |
Version vom 8. August 2012, 04:21 Uhr
When you're studying to pass the BSCI exam and earn your CCNP certification, you are going to be introduced to ISIS. ISIS and OSPF are each link-state protocols, but ISIS works quite differently from OSPF. You should master these facts in order to earn your CCNP.
1 of the major differences in between OSPF and ISIS will be evident to you when you initial start your BSCI exam research, and that is the terminology. ISIS uses terms that no other protocol you have studied to date utilizes, and studying these new terms alkaline diet is the initial step to BSCI and CCNP exam good results.
First off, what does "IS" stand for in "ISIS"? It stands for "Intermediate System", which sounds like a group of routers. As opposed to Autonomous Systems, which are logical groups of routers, an Intermediate Technique is just a single router. That's it.
You are going to also turn into familiar with End Systems, referred to in ISIS as an "ES". The End Program is basically an end host.
ISIS and OSPF each use the idea of locations, but ISIS requires life ionizer 9100 water ionizers a different approach to this concept. ISIS routers use 3 diverse sorts of routing levels, according to the location a router has been placed in. Level 2 routers are connected only to the backbone and serve as a transit device amongst non-backbone locations. Level 1 routers are completely internal to a non-backbone area.
ISIS utilizes both Level-1 and Level-two Hellos, which means that the two varieties of routers just mentioned can't form an adjacency. Fortunately for us, there is a middle ground, and that is the Level 1-2 router. These routers connect non-backbone locations to backbone areas. L1-L2 routers keep two separate routing tables, one for L1 routing and one more for L2 routing. This is the default setting for a Cisco router, and L1-L2 routers can type adjacencies with each L1 and L2 routers.
Part of the challenge of understanding ISIS is finding used to the differences among ISIS and OSPF. Preserve studying the terminology, master 1 concept at a time, and soon you will be a master of ISIS and a CCNP to boot!
