Cisco CCNP / BSCI Certification: Introduction To ISIS Terminology: Unterschied zwischen den Versionen
| Zeile 1: | Zeile 1: | ||
| − | When you | + | When you are studying to pass the BSCI exam and earn your CCNP certification, you are going to be introduced to ISIS. ISIS and OSPF are both link-state protocols, but ISIS functions really differently from OSPF. You need to master these specifics in order to earn your CCNP.<br><br>One particular of the key differences among OSPF and ISIS will be evident to you when you [http://www.youtube.com/watch?v=AkRgsW2UJXU check out water ionizer] 1st [http://www.ionizeroasis.com/chanson-violet-water-ionizer.html patent pending] start your BSCI exam research, and that is the terminology. ISIS makes use of terms that no other protocol you've studied to date makes use of, and understanding these new terms is the 1st step to BSCI and CCNP exam good results.<br><br>First off, what does "IS" stand for in "ISIS"? It stands for "Intermediate Technique", which sounds like a group of routers. As opposed to Autonomous Systems, which are logical groups of routers, an Intermediate Technique is just a single router. That's it.<br><br>You'll also grow to be familiar with Finish Systems, referred to in ISIS as an "ES". The End Technique is merely an end host.<br><br>ISIS and OSPF each use the notion of areas, but ISIS takes a various method to this concept. ISIS routers use three various varieties of routing levels, according to the place a router has been placed in. Level 2 routers are connected only to the backbone and serve as a transit device between non-backbone areas. Level 1 routers are entirely internal to a non-backbone area.<br><br>ISIS uses both Level-1 and Level-two Hellos, meaning that the two sorts of routers just mentioned can not form an adjacency. Luckily for us, there is a middle ground, and that is the Level 1-two router. These routers connect non-backbone areas to backbone locations. L1-L2 routers [http://www.ionizeroasis.com/life-5000-water-ionizer.html get life 5000 alkaline] maintain two separate routing tables, 1 for L1 routing and one more for L2 routing. This is the default setting for a Cisco router, and L1-L2 routers can type adjacencies with both L1 and L2 routers.<br><br>Component of the challenge of learning ISIS is acquiring utilized to the differences among ISIS and OSPF. Keep studying the terminology, master a single idea at a time, and soon you'll be a master of ISIS and a CCNP to boot! |
Version vom 8. August 2012, 21:01 Uhr
When you are studying to pass the BSCI exam and earn your CCNP certification, you are going to be introduced to ISIS. ISIS and OSPF are both link-state protocols, but ISIS functions really differently from OSPF. You need to master these specifics in order to earn your CCNP.
One particular of the key differences among OSPF and ISIS will be evident to you when you check out water ionizer 1st patent pending start your BSCI exam research, and that is the terminology. ISIS makes use of terms that no other protocol you've studied to date makes use of, and understanding these new terms is the 1st step to BSCI and CCNP exam good results.
First off, what does "IS" stand for in "ISIS"? It stands for "Intermediate Technique", which sounds like a group of routers. As opposed to Autonomous Systems, which are logical groups of routers, an Intermediate Technique is just a single router. That's it.
You'll also grow to be familiar with Finish Systems, referred to in ISIS as an "ES". The End Technique is merely an end host.
ISIS and OSPF each use the notion of areas, but ISIS takes a various method to this concept. ISIS routers use three various varieties of routing levels, according to the place a router has been placed in. Level 2 routers are connected only to the backbone and serve as a transit device between non-backbone areas. Level 1 routers are entirely internal to a non-backbone area.
ISIS uses both Level-1 and Level-two Hellos, meaning that the two sorts of routers just mentioned can not form an adjacency. Luckily for us, there is a middle ground, and that is the Level 1-two router. These routers connect non-backbone areas to backbone locations. L1-L2 routers get life 5000 alkaline maintain two separate routing tables, 1 for L1 routing and one more for L2 routing. This is the default setting for a Cisco router, and L1-L2 routers can type adjacencies with both L1 and L2 routers.
Component of the challenge of learning ISIS is acquiring utilized to the differences among ISIS and OSPF. Keep studying the terminology, master a single idea at a time, and soon you'll be a master of ISIS and a CCNP to boot!
